27
Parts to wash after every use
a
Wash with water or lukewarm water using a soft
sponge
.
b
Wipe water with a dry cloth and completely dry the
components.
Parts to wash when dirty
● Wipe the outer and inner surfaces with a
damp cloth.
● Wipe the power cord with a dry cloth.
● Remove any rice grain on heater plate and
center sensor.
* If dust is hard to remove, apply commercially
available sandpaper (around #320), and wipe it off
with a damp cloth.
● Remove any burned rice, uncooked rice,
or other matter from the upper casing and
around the hook button.
Be sure to follow cleaning direction page27, page28.
Any other servicing should be performed by an authorized service representative.
Clean the rice cooker the same day it is used to maintain cleanliness.
Thoroughly clean the rice cooker regularly.
8
CLEANING AND
MAINTENANCE
◆ Unplug the power cord and allow the rice cooker to cool down before cleaning. ◆ Use a soft sponge or cloth.
◆ Use kitchen detergent (for tableware and kitchen utensils) only.
● Do not allow water to come into contact with the
mechanism inside the body.
● Do not immerse power cord in water, keep away
from water.
● Do not pull lid gasket.
● Do not use heavy duty
scrub sponge. Non-stick
coating may be damaged.
● Do not put dishes in the inner pan and use the pan
as a dishpan. Also, do not put the inner pan on a
dish rack to dry the pan.
Doing so will cause
blistering or removal
of the fluorocarbon
resin on the surface
of the inner pan.
Inner pan
Measuring cup Spatula
Steam cap
Heat
releasing
plate
Upper
casing
Inner lid
(JBA-T model)
Steam basket
Center
sensor
Heater
Plate
<
JBA-A model
>
Heat
releasing
plate
Center
sensor
<
JBA-T model
>
Power cord
120V type
Power cord
Power plug
220V-240V type
Upper
casing
Heater
Plate
Do not
use heavy
duty scrub
sponge.
Rice cooker plug
Power
plug
Ladle
To Next Page
Loading...
Need help?
General
