Tiger JBA-T18A - Timer Setting

16
English
❙Timer Setting
The “Timer” function preset the actual time when cooking is completed.
STEP 1. The current time must be set before setting the timer (see page 15).
STEP 2. Press the [Timer] key. If the Keep warm lamp is on, press the [Cancel] key fi rst.
Every press on the [Timer] key alternates blinking
between “TIMER 1” and “TIMER 2”. Select either choice.
NOTE: The rice cooker stores the preset time even after
the AC power cord is unplugged.
STEP 3. Press the [Hour] key to change the hour and press the [Min] key to change the
minutes by holding the keys down shortly.
NOTE: ●The [Min] key only changes in 10-minute intervals.
 ●Do not preset timer more than 12 hours to avoid
spoiling the rice.
* Last timer setting will appear on display. (If you are using
same timer, do not need to set it again)
STEP 4. Press the [Menu] key and select an intended menu.
Every press of the [Menu] key moves the ▲ triangle
indicator in the display unit in a clock-wise order.
Beep
Beep
Beep
Blinks
Blinks
Blinks
Blinks