Tiger MALAYAN - Step 8: Install Roof Boards; Step 9: Install Roof Batten and Skirting

TIGER MALAYAN GARAGE LOG CABIN GENERAL INSTRUCTIONS
G1 G2 G3
N65
N65
N65
Step 8:
INSTALL ROOF BOARDS
• Before installing the roof boards, check that the cabin is square both vercally & horizontally.
Adjust if required.
• Posion a tongue & groove roof board ush with purlin at one end of roof.
• Fix through apex purlin using 2x N65 per board.
(Detail G1)
• Fix through one addional purlin using 2x N65 per board. (Detail G2)
• Fix through side top logs using 2x N65 per board. (Detail G3)
• Connue working across roof, repeang the steps above.
• The nal roof board may need trimming to sit ush with purlin at end.
CRITICAL!: ALL ROOF BOARDS MUST HAVE 2X N65 PER FIXING POINT AS OUTLINED ABOVE.
Step 9:
INSTALL ROOF BATTEN AND SKIRTING
• Fix roof baen onto the underside of roof boards on low side using 6x N40, evenly spaced along length.
Finish with a piece of skirng, aached using 6x N40, evenly spaced along length.
(Detail H1 & H2)
NOTE: ROOF BATTENS AND SKIRTING MAY COME IN MORE THAN 1 SECTION.
H2H1
N40
N40
12
gersheds.com 0113 205 4189 sales@gersheds.com