Please retain instructions for future reference
21
Step 14:
FULL PANE WINDOW FASCIA ASSEMBLY
(MODULE PACKS: FCW1 & U)
• Open Module Pack “U”.
• Take window frame and attach the external fascia only.
On a window, the external side fascia is the longer of
the two supplied. (1770mm)
• Attach side fascias rst. Secure using 3x S35 evenly
spaced per fascia. Angle pilot hole rst and then screw
through fascia board into frame.
• Repeat the process for the header and bottom fascia
board using 3x S35 evenly spaced per fascia.
S35
S35
To Next Page
Loading...
