Please retain instructions for future reference
07
Step 2:
FLOOR ASSEMBLY
(CHECK WHAT SIZE YOU HAVE AND THE MODULES SUPPLIED)
• Place half logs as shown.
• Secure to tanalised oor bearer through notch at end using 1x S40 per notch.
(Detail B)
• Using a utility knife or similar, cut a slight notch in the top tongue of each half log and screw through log into
tanalised oor bearer using 1x S80 per cut notch.
(Detail C)
C
B
S40 S40 S40
S80
TOP TONGUE
To Next Page
Loading...
