use of this product will prevent injury, property damage or other losses. Note that this product may
be bypassed, compromised, fail or fail to warn like any alarm, including due to improper installation,
positioning, or maintenance, tampering; dead, faulty, or improperly installed batteries; sensing
limitations and component failures.
Audible alarm signals may be outside of hearing range, muted by doors, walls and floors, unheard by
deep sleepers or the hearing-impaired, or overwhelmed by other sounds.
Battery Warning
Caution: Batteries may leak harmful liquids or ignitable materials or explode causing injury and
product damage.
• Do not mix old and new batteries or other battery types
• Replace all batteries at the same time
• Replace fully discharged batteries immediately
2. Introduction
Congratulations with your new X1 Tiiwee Alarm Kit. The Tiiwee Alarm Kit is a versatile alarm system
that detects if people or animals are entering your home or shop. It allows you to use several sensors
with one or more alarms in up to four different zones. These sensors (PIR Motion Sensors,
Window/Door sensors) connect wirelessly to an alarm unit ("X1-siren"). This alarm unit produces a
doorbell-sound or a very loud siren. The alarm unit can be placed on a fixed position or taken with
you as you move around the house or if you go to sleep.
A maximum of 10 sensors can be connected to each zone. Also, up to 10 remote controls can be
paired with each alarm unit. A sensor or remote control can be paired to several Alarm units if
required.
Intended use
The Tiiwee Home Alarm System is primarily designed to deter burglars when they enter your home.
The heart of the system is the X1-siren. Place the siren in your home where burglars are most likely
to enter. If you have a larger home, please consider placing additional Tiiwee X1 or A3 (outdoors-)
sirens.
The system is ready for use. Your system is pre-configured, and the sensors and remote controls are
connected to the X1-siren. Window sensors are connected to zone 1. If a PIR motion sensor is
included, it is connected to zone 2. We advise reading this user manual carefully and to familiarize
yourself with its operating principle and ways to fine-tune it to your exact needs.
3. System overview
To Next Page
Loading...
