Tiiwee X1 User Manual

Copyright © 2020 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
1

Tiiwee X1 Specifications

General

Brand	Tiiwee
Model	X1
Category	Security System
Language	English

Summary

1. Disclaimer

Hearing Safety Warning

Caution about prolonged exposure to alarm siren potentially causing permanent hearing loss.

4. Installing Your Tiiwee Alarm System

Installation: Unpacking & Battery Prep

Steps for unpacking kit components and removing battery protection strips from devices.

Installation: Mounting X1-Siren

Instructions for attaching the X1-siren unit to a wall using pads or screws.

5. Daily Use of Your Alarm System

Daily Use: Power & Activation

How to switch the alarm system on/off and activate/deactivate it using the siren or remote.

Daily Use: Alarm Operation

How the siren sounds when triggered and methods to stop an active alarm.

6. Expanding Your System

Expanding System: Add Devices

Adding more door sensors, motion detectors, and connecting additional X1 or A3 sirens.

Expanding System: Pair Remotes

Procedure to connect up to 10 remote controls to the X1-siren unit.

Expanding System: Add Sirens

How to connect additional X1 or A3 outdoor sirens to the system.

7. Deleting Accessories or Changing Zones

Zone Management: Delete & Reconnect

Steps to delete sensors from a zone and reconnect them to a different zone.

Zone Management: Disconnect Remotes

8. Battery Lifetime and Low Battery Voltage

Battery: Low Voltage Indicators

How to identify low battery status on the X1-siren, door sensors, and PIR motion detectors.

9. Replacing Batteries

Battery Replacement

10. Resetting the X1-Siren to Factory Settings

X1-Siren Factory Reset