TIL TAF-550 - Toggling between Two Channels; Transmit Inhibit

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TAF-550 Installation & Operating Instructions TiL 96RE187 Rev D
3-13
3.4.7 Transmit Inhibit
To Inhibit the transmit function on a desired channel press "E","9" immediately followed by the
channel "#" or “##” to be inhibited. Subsequent pressing of "E","9","#" or "E","9","##" will enable
the transmit function.
NOTE
After inhibiting the transmit function, the Tx inhibited
channel must be recalled from memory for this function
to take effect.
Examples:
Press
or Press (for 25 channels)
Channel 1 frequency 119.750 MHz stored in the previous example will be displayed.
Press the PRESS-TO-TALK switch. Observe that the TX indicator LED lights.
Press
Press or
Press
Press (for 25 channels)
Press the PRESS-TO-TALK switch. Observe that the TX indicator LED does not light.
Press
Press or
Press
Press (for 25 channels)
Press the PRESS-TO-TALK switch. Observe that the TX indicator LED lights.
3.4.8 Toggling Between Two Channels
Press
to recall previous channel.
Example:
Recall Channel 0 as described in para. 3.4.6 (Recalling a Stored Channel).
117.975 will be displayed.
Recall Channel 2
138.000 will be displayed.
Press
117.975 will be displayed.
Press
138.000 will be displayed.