IM2019
11
9. OPERATING MODES
Fig. 16*
*Image is for reference only and may differ from actual control panel.
1. “TIMER” button - in the case of power on, press the button to set the time to automatically
turn off the device; in the case of power off, press the button to set the time to automatically turn
on the device. Press the “TIMER” button, then, when the timing symbol flashes on the LED
display, press “UP” and “DOWN” buttons to select the required timing value. Timing values can
be set in 1-24 hours range. One pressing of “UP” or “DOWN” button equals 1 hour.
2. “SPEED” button - in cooling and fan mode, press the button to select HIGH, LOW wind
speed operation. In dehumidifying mode, pressing the key is invalid, in this mode the fan works
only in low wind speed operation.
3, 5. “UP” and “DOWN” buttons - press these buttons to change the setting temperature or
setting time, operate as follows:
• While setting temperature, press “UP” or “DOWN” button to select the required
temperature (not available in fan or dehumidifying mode).
• While setting time, press “UP” or “DOWN” button to select the required time.
4. LED display
6. “MODE” button - press the button to switch between cooling → fan → dehumidifying
modes.
7. “POWER” button - press the button to turn on and turn off the device.