TIMBERWOLF Log Splitters
Qperatin~ Instructions
Operation Manual
Start Up
Splitting Safety
• Start motor.
NOTE
See motor manufacturer's manual for motor
starting and maintenance instructions.
• Run motor at idle for 10 - 15 minutes to let hydraulic
oil warm up.
• Always stand inside the Operator Zone to run the log
splitter. Never operate the log splitter from anyplace
else, including the area in front of the valve handle.
)
,
~operatorZone -
Stand in this area
when operating
log splitter
• Handle logs only from the sides; never by the ends.
• For best splitting results, place log with butt end on the
base plate.
• Be very careful to keep anns and fingers away from
the wedge and base plate.
• Keep hands and fingers clear at all times. Many log-
splitting accidents happen on the return portion of the
stroke.
13
To Next Page
Loading...
