TIMBERWOLF Log Splitters
Operation Manual
• Valve handle stays in locked position until wedge is
fully retracted.
• To stop wedge -
• During forward stroke, release control handle .
• During return stroke, pull control handle
forward to release it from the locked position.
NOTE
Operate hydraulic control valve smoothly. Allow
a short pause when reversing directions, then
press lever firmly in direction you need to go.
Slamming valve lever in either direction makes
the system wear out faster.
• Clear split pieces from the operator zone frequently.
Allowing pieces to accumulate underfoot can be both
inconvenient and unsafe.
15
To Next Page
Loading...
