HOUR MINUTE SECONDS “ONCE”/“REPEAT”
Setting the Timer to “ONCE” will cause the Timer to stop
after it completes its countdown; selecting “REPEAT” will
cause the Timer to repeat the countdown indefinitely until
the Timer is manually stopped.
The Timer can be set to a maximum time of 23:59.59
(24 hours).
Using the Countdown Timer
Press and release MODE until you see “TIMER” on the
display.
Press START/SPLIT to start the Timer, press STOP/RESET
to stop it. You may press START/SPLIT to resume the
countdown, or press STOP/RESET once again to reset the
Timer to the original countdown time.
MODE to enter this mode (FORMAT will appear on the dis-
play). Press START/SPLIT to change to the desired format
and then press MODE to return to RECALL, or press SET to
return to CHRO mode.
TIMER - Countdown Timer Mode
The Countdown Timer is useful for situations where you
want to time an event with a fixed duration, like a 30-
minute hike, a 3-minute egg or series of 1-minute
sprint/rest intervals.
Setting the Countdown Timer
Refer to section entitled “Setting Operation” on page 11 to
understand how the buttons function during setting.
You may set the following values for the Countdown
Timer:
4140
To Next Page
Loading...
Need help?
General
