Backup Alert
When the Alarm time arrives, the watch will generate an
alert for 20 seconds. Y
ou may press any button on the
watch to silence this alert. If you don’t silence the alert,
the watch will assume that you missed that Alarm time
and will automatically enable a backup alert, indicated by
a flashing icon on the display, which will sound five
minutes after the Alarm time.
Selecting and Arming/Disarming Alarms
Press and release MODE until you see “ALARM” on the
display.
Press and release STOP/RESET to select an Alarm
(AL-1 through AL-5)
Arm or disarm the selected Alarm by pressing
START/SPLIT. The word “ON” and the icon will appear
next to the Alarm time when the Alarm is armed.
The icon will also be visible in TIME mode if any one of
the Alarms is armed. When the Alarm is armed, it will
generate an alert at the set time.
4544
To Next Page
Loading...
Need help?
General
