96
97
the fourth hand counterclockwise (pressing button B
will move this hand clockwise), until the desired num-
ber of seconds has been selected. Please note that
you are adding or subtracting the number seconds to
complete the total desired time (example: for a total
desired countdown time of 2:53:30, you will push
button B 30 times to select 30 seconds). Once you
have completed setting the number of seconds, push
the crown in to position 1 to confirm your complete
countdown timer value selection.
COUNTDOWN TIMER OPERATION
Once you have set the countdown timer to the desired
length of time to count down, you can now operate the
countdown timer.
Starting the countdown sequence: Press button A to
start the countdown timer. The fourth center hand and
the lower hand will begin to move counterclockwise. The
upper hand will move clockwise. The hands will continue
to indicate the remaining time left in the countdown
sequence until the length of time you have set the count-
down timer has passed and the value of remaining time
reaches zero. When the remaining time in the sequence
reaches zero, the chime will sound signaling to you the
countdown sequence has completed.
To Next Page
Loading...
Need help?
General
