5
Setting the Time
1
2 SECS
3
2
Press and release the – or + Set Button to adjust the clock to the current time (press and hold for
rapid adjustment). NOTE: Make sure to set the correct AM or PM time. AM/PM indicators appear
to the left of the time display.
By default, the Daylight Saving Time (DST) Switch located on the bottom of the unit is set to
Auto to automatically adjust the time when it changes in March and November. If you are in a
location that does not observe Daylight Saving Time, slide the DST Switch to the -1 or +1 position
before setting the time. To adjust time manually, slide the DST Switch to -1 (center) for Standard
Time. To add an hour for Daylight Saving Time, slide the DST Switch to the +1 position (left).
Slide back when Standard Time resumes.
Press and hold the Time Set Button
located on the right side of the unit until
the time flashes on the display and a
beep sounds.
To Next Page
Loading...
