EasyManua.ls Logo

Tineco S10 Series - Charging the Battery

Tineco S10 Series
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
14
Charging the Battery
Place the main body with the battery on the charging dock, plug
in the adaptor and charging port, the green light blinking shows
charging correctly.
Note:
If you need a spare battery, please purchase from Tineco.
Warning:
Only use the Tineco-provided adaptor to charge the battery.
During long periods of not being used, store the lithium battery in a cool, dry place. Ensure the
battery is half-charged every 3 months (2 battery indicators illuminated).
Store appropriately indoors in a dry place. Do not expose appliance to sunlight or freezing
temperature. Recommended temperature range: 39.2°F (4°C)~104°F (40°C).
Runtime
When in AUTO mode, the runtime is approximately 40 minutes. When MAX power is used, the
runtime is approximately 10 minutes.
Estimated runtime data was obtained by a Tineco Laboratory using one battery and non-motorized
accessories.
Charging Time
A full charge takes approximately 4 hours for one battery.
Estimated data was obtained by a Tineco Laboratory using ambient temperatures between
39.2°F (4°C) to 104°F (40°C).
Indicator
When in Use
Battery level > 20%: solid green light.
Battery level ≤ 20%: solid red light.

Related product manuals