TIPTEL Ergophone 307 - Service; Setting Up the Device; Connecting the Answering Machine

Service
Service
Scope of delivery
Included in the packaging of your Ergophone 307 are:
 Ergophone 307
 Connection cables
 Adaptor (not in all countries)
 Power supply unit 5V / 1A / DC
 Operating instructions
Setting up
Your Ergophone 307 has been manufactured for normal conditions
of use. Solvents in furniture lacquers, wood oils and paint preserva-
tives may corrode the device feet. Device feet altered in this way
may then leave stains on furniture.
Therefore always use a non-slip base, especially with new or recent-
ly treated furniture.
Connecting
You must attach all necessary cables before you can start using
your Ergophone 307. The device offers two different connection op-
tions, depending on whether you are using a socket with several
slots or just one.
Socket with several slots
1 Plug the existing telephone into the socket (slot F).
2 Insert the power supply unit with the small connector into the
"POWER" jack and then insert the power supply unit into a 230V
wall socket.
3 Insert the TAE adaptor into a free end of the connection cable.
4 Insert the second free end of the connection cable into the
"LINE" jack, and insert the TAE adaptor into the socket (slot N).