Tiptel b.v.
Camerastraat 2
1336 BC Almere
Tel: 036 53 666 50
Fax: 036 53 678 81
[ audio0 ]
path = /config/voip/sipAccount0.cfg
codec.
0 means to disable the codec.
1 means to enable the codec.
One of the
following:
PCMU
PCMA
G723_53
G723_63
G729
G722
G726-16
G726-24
G726-32
G726-40
It stands for a specific Codec type.
It stands for the priority of a specific
enabled codec.
It defines the payload of the codec.
[ audio1 ]
path = /config/voip/sipAccount0.cfg
The parameters and the Permitted values are the same as[ audio0 ]. For
each account there are totally 10 usable codecs and each one has a section
in configuration files and so there are sections from [ audio0 ] to [ audio10 ]
for each account. (audio 6 is just a reserved section)
They have default values as below. If you want to change one of them,
please note that there should be no same parameter values for the same
account:
[ audio0 ]
enable = 1
PayloadType = PCMU
priority = 1
rtpmap = 0
[ audio1 ]
enable = 1
PayloadType = PCMA
priority = 2
rtpmap = 8
[ audio2 ]
enable = 0
PayloadType =
G723_53
priority = 0
rtpmap = 4
[ audio3 ]
enable = 0
PayloadType =
G723_63
[ audio4 ]
enable = 1
PayloadType = G729
priority = 3
rtpmap = 18
[ audio5 ]
enable = 1
PayloadType = G722
priority = 4
rtpmap = 9
[ audio6 ]
enable = 0
PayloadType = iLBC
priority = 0
rtpmap = 102
[ audio7 ]
enable = 0
PayloadType =
G726-16
priority = 0
[ audio8 ]
enable = 0
PayloadType =
G726-24
priority = 0
rtpmap = 102
[ audio9 ]
enable = 0
PayloadType =
G726-32
priority = 0
rtpmap = 2
[ audio10 ]
enable = 0
PayloadType =
G726-40
priority = 0
rtpmap = 104
[ audio2 ]
path = /config/voip/sipAccount0.cfg
[ audio3 ]
path = /config/voip/sipAccount0.cfg
[ audio4 ]
path = /config/voip/sipAccount0.cfg
[ audio5 ]
path = /config/voip/sipAccount0.cfg
[ audio7 ]
path = /config/voip/sipAccount0.cfg
[ audio8 ]
path = /config/voip/sipAccount0.cfg
[ audio9 ]
path = /config/voip/sipAccount0.cfg
[ audio10 ]
path = /config/voip/sipAccount0.cfg
To Next Page
Loading...
