TIPTEL IP 286 - Page 20

20
www.tiptel.nl
Tiptel b.v.
Camerastraat 2
1336 BC Almere
Tel: 036 53 666 50
Fax: 036 53 678 81
priority = 0
rtpmap = 4
rtpmap = 112
[ WAN ]
path = /config/Network/Network.cfg
WANType
0,1 or 2
It defines the type of Internet Port
(WAN).
0 stands for DHCP.
1 stands for PPPoE.
2 stands for Static IP Address.
The default is 0.
WANStaticIP
IP Address
It defines the IP Address when using
static WAN settings.
The default is blank.
WANSubnetMask
Network
Mask
It defines the Subnet Mask when
using static WAN settings.
The default is blank.
WANDefaultGatewa
y
IP Address
It defines the Default Gateway when
using static WAN settings.
The default is blank.
[ DNS ]
path = /config/Network/Network.cfg
PrimaryDNS
IP Address
It defines the Primary DNS when
using static WAN settings.
The default is blank.
SecondaryDNS
IP Address
It defines the Secondary DNS when
using static WAN settings.
The default is blank.
[ PPPoE ]
path = /config/Network/Network.cfg
PPPoEUser
string
It defines the User name when using
PPPoE WAN settings.
The default is blank.
PPPoEPWD
string
It defines the Password when using
PPPoE WAN settings.
The default is blank.
[ LAN ]
path = /config/Network/Network.cfg
LANTYPE
0 or 1
It defines the type of PC Port (LAN).
0 stands for Rooter.
1 stands for Bridge.
The default is 1.
RouterIP
IP Address
It defines the IP Address when the
LAN is set as Rooter.
The default is 10.0.0.1
LANSubnetMask
Network
Mask
It defines the Subnet Mask when the
LAN is set as Rooter.
The default is 255.255.255.0.
EnableDHCP
0 or 1
It means whether to enable DHCP
server when the LAN is set as
Rooter.
0 stands for Disabled.
1 stands for Enabled.
The default is 1.