Tiptel b.v.
Camerastraat 2
1336 BC Almere
Tel: 036 53 666 50
Fax: 036 53 678 81
It defines the IP Address range the
DHCP rooter will allocate.
The default is from 10.0.0.10 to
10.0.0.100.
[ VLAN ]
path = /config/Network/Network.cfg
It defines the VLAN Active option of
LAN Port.
0 stands for Disabled.
1 stands for Enabled.
The default is 0.
It defines the VID of LAN Port.
The default is 0.
It defines the VLAN USRPRIORITY
of LAN Port.
The default is 0.
It defines the VLAN Active option of
PC Port.
0 stands for Disabled.
1 stands for Enabled.
The default is 0.
It defines the VID of PC Port.
The default is 0.
It defines the VLAN USRPRIORITY
of PC Port.
The default is 0.
[ QOS ]
path = /config/Network/Network.cfg
It defines the value of Voice QoS.
The default is 40
It defines the value of SIP QoS.
The default is 40
[ RTPPORT ]
path = /config/Network/Network.cfg
It defines the MaxRTPPort of Local
RTP Port.
The default is 11800.
It defines the MinRTPPort of Local
RTP Port.
The default is 11780.
[ SYSLOG ]
path = /config/Network/Network.cfg
It defines the server where the
syslog is supposed to be exported
onto.
[ telnet ]
path = /config/Network/Network.cfg
It defines whether to enable or
disable Telnet to the phone.
0 stands for Disabled.
1 stands for Enabled.
The default is 0.
It defines the Language used on the