EasyManua.ls Logo

TIPTEL IP 286 - Page 22

TIPTEL IP 286
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
www.tiptel.nl
Tiptel b.v.
Camerastraat 2
1336 BC Almere
Tel: 036 53 666 50
Fax: 036 53 678 81
path = /config/Setting/Setting.cfg
Name
Webpage.
The default is “English”. The other
Languages are: Turkish, Czech,
Russian, Chinese_S depending on
the firmware support.
[ Time ]
path = /config/Setting/Setting.cfg
TimeZone
Time Zone
from -11 to
+12
It defines the Time Zone you expect
to use on the phone.
The default is +8.
TimeServer1
Domain
name or IP
Address
It defines the Primary NTP Server.
The default is cn.pool.ntp.org.
TimeServer2
Domain
name or IP
Address
It defines the Secondary NTP
Server.
The default is cn.pool.ntp.org.
Interval
Integer
It defines the Update Interval when
using NTP Server.
The default is 1000(seconds).
SummerTime
0, 1 or 2
It defines the activity of Daylight
Saving Time.
0 stands for Disabled.
1 stands for Enabled.
2 stands for Automatic.
The default is 2.
DSTTimeType
0 or 1
It defines the Fixed Type of Daylight
Saving Time.
0 stands for By Date.
1 stands for By Week.
The default is blank.
StartTime
SPECIAL
It defines the StartTime of Daylight
Saving Time.
If the Fixed Type for Daylight Saving
time is By Date, its value rule is
MM/DD/HH which means
Month/Day/Hour.
If the Fixed Type for Daylight Saving
time is By Week, its value rule is
Start Month/ Start Day of Week/ Start
Day of Week Last in Month/ Start
Hour of Day. For a value of 1/4/2/5 in
this case, it means the start time is at
5 o‟clock on Tuesday of the 4
th
week
in January.
The default is blank.
EndTime
SPECIAL
It defines the EndTime of Daylight
Saving Time.

Related product manuals