TIPTEL IP 286 - Page 29

29
www.tiptel.nl
Tiptel b.v.
Camerastraat 2
1336 BC Almere
Tel: 036 53 666 50
Fax: 036 53 678 81
path = /config/vpPhone/vpPhone.ini
[ memory4 ]
path = /config/vpPhone/vpPhone.ini
[ memory5 ]
path = /config/vpPhone/vpPhone.ini
[ memory6 ]
path = /config/vpPhone/vpPhone.ini
[ memory7 ]
path = /config/vpPhone/vpPhone.ini
[ memory8 ]
path = /config/vpPhone/vpPhone.ini
[ memory9 ]
path = /config/vpPhone/vpPhone.ini
[ memory10 ]
path = /config/vpPhone/vpPhone.ini
[ memory11 ]
path = /config/vpPhone/vpPhone.ini
From [ memory11 ] to [ memory16 ] are used for Line keys. The available
sections depend on the numbers of Line keys. For IP 280 which have only 2
line keys, only the first 2 sections are available. For IP 284,only the first 3
sections are available.
In addition, the settings for a Line key is not completely the same as a DSS
key. For example, a line key cannot be configured as blf.
[ memory12 ]
path = /config/vpPhone/vpPhone.ini
[ memory13 ]
path = /config/vpPhone/vpPhone.ini
[ memory14 ]
path = /config/vpPhone/vpPhone.ini
[ memory15 ]
path = /config/vpPhone/vpPhone.ini
[ memory16 ]
path = /config/vpPhone/vpPhone.ini
[ Profile ]
path = /config/vpm.cfg
VAD
0 or 1
It defines the activity status of VAD.
0 stands for Disabled.
1 stands for Enabled.
The default is 0
CNG
0 or 1
It defines the activity status of CNG.
0 stands for Disabled.
1 stands for Enabled.
The default is 1.
ECHO
0 or 1
It defines the activity status of Echo
canceller.
0 stands for Disabled.
1 stands for Enabled.
The default is 1.
SIDE_TONE
-3 or
-32768
It is an invisible setting which can
only be configured via auto provision.
-32768 stands for Disable Side tone.
-3 stands for Enable Side tone.
The default is -3.