TIPTEL IP 286 - Page 28

28
www.tiptel.nl
Tiptel b.v.
Camerastraat 2
1336 BC Almere
Tel: 036 53 666 50
Fax: 036 53 678 81
bla stands for Shared Line.
The default is blank.
Line
Integer
from 0 to
max line
number
Seen from the web, it reflects the
value under Line title.
It defines the Line you are going to
use for a specific function (if the
function needs to specify a line).
Normally,0 stands for Auto,1 stands
for Line1 and so on.
However, it‟s a little different when
configured as bla or blf in which case
0 stands for Line1, 1 stands for Line2
and so on.
The default is 0.
Value
It depends
Seen from the web, it reflects the
value under Extension title.
Normally, the value is an extension
number while in some cases it‟s not.
For example, when you configure a
key as URL, the value must be a url
string.
The default is blank.
PickupValue
string
It is used only for BLF. It defines the
pickup number that your server
allocates.
DKtype
Integer
It‟s a number reflects the key
function.
0:N/A 1:Conference
2:Forward 3:Transfer
4:Hold 5:DND
6:Redial 7:Call Return
8:SMS 9:Call Pickup
10:Call Park 11:DTMF
12:Voicemail 13:SpeedDial
14:Intercom 15:Line(for line key
only)
16:BLF 17:URL
18:Group Listening 19:Public
Hold
20:Private Hold 21:Shared Line
22:XML PhoneBook
The default is 0.
[ memory2 ]
path = /config/vpPhone/vpPhone.ini
From [ memory1 ] to [ memory2 ] are used for 10 DSS Keys on the phone IP
286/IP 284. For a phone having no DSS keys like IP280, it‟s no use
configuring the parameters.
[ memory3 ]