Titan Controls ATLAS 9 - User Manual

Atlas
®
9
CO
2
Controller with Remote Sensor
Instruction Manual
www.titancontrols.net

Titan Controls ATLAS 9 Specifications

General

Product Type	Environmental Controller
Control Type	Digital
Amperage	15A
Voltage	120V
Channels	4
Amperage per channel	15A
Total Amperage	15A
Weight	2.5 lbs
Display	LCD
Humidity Range	10% to 90% RH
Temperature Range	32°F to 122°F (0°C to 50°C)

Summary

Warnings and Cautions

Sulfur Vaporizer Warning

Specific warning regarding sulfur vaporizers and sensor protection.

General Safety Precautions

Essential safety guidelines for operating the CO2 controller and avoiding damage.

Atlas 9 CO2 Controller Overview

Factory Settings

Default configuration values for the CO2 controller, including set point and deadband.

Operation Instructions

Guidance on using the controller, including programming set points, dead-band, min/max recall, and calibration.

CO2 Modes and Output

PPM Up Mode

Increases CO2 using a generator or regulator/tank.

Fuzzy Logic Mode

Controls CO2 using a regulator/tank with fuzzy logic.

Output Indicator

Explains the function of the output LED.

Controller Specifications

Controller Diagrams

Installation Examples

Warranty Information

Service and Repair Program

Warranty Service Procedures

Returning Units for Service

Steps and required information for returning the unit for factory repair or reconditioning.