Need help?Do you have a question about the Titan Controls SPARTAN Series and is the answer not in the manual?
General| Control | Temperature and Humidity |
|---|---|
| Operating Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Humidity Range | 10% to 90% RH |
| Display | LCD |
| Amperage | 15 Amps |
Warning regarding sulfur vaporizer use and sensor protection to avoid damage and voided warranty.
Essential safety guidelines for operating the environmental controller, including water avoidance, secure mounting, and electrical safety.
Setting CO2 PPM set points, dead-bands, and operational modes like Fuzzy Logic for CO2 enrichment or exhaust.
Recalling CO2 min/max levels and performing sensor calibration for accurate environmental readings.
Adjusting day/night temperature set points, dead-bands, and setting high/low temperature protection limits.
Setting humidity levels, dead-bands, and selecting Humidify/Dehumidify modes for moisture control.
Understanding how CO2, temperature, and humidity controls interact or operate independently via lock functions.
To Next Page
