Titan Dynamics
Titan Dynamics Webpage
Visit our Facebook page
Join our Discord server
Page 8 of 25
We recommend using the newest version of Ultimaker Cura. This link can be used to
download our own slicer profile.
4.2: Part Orientation
It is necessary to orient each part correctly on the build plate to avoid disconnected
overhangs. Take care when doing this as the entire model is designed to be printed with
no supports. If you orient some parts wrong, the print will fail. It may also be necessary
to rotate and carefully position some parts to fit within the build area on smaller
printers.
Examples for part orientation:
Fuse 1
Fuse 3
To Next Page
Loading...
