Accessories (not included in the delivery)
Description Order No.
Spray nozzle 410
Water-soluble and solvent based enamels and paints, oils and release agents 671-410
Spray nozzle 515
Enamel paints, undercoats, primers, llers, indoor latex paints and indoor emulsions 661-515
Spray nozzle 517
Enamel paints, undercoats, primers, llers, indoor latex paints and indoor emulsions, anti-corrosive paints 661-517
Spray nozzle 519
Enamel paints, undercoats, primers, llers, indoor latex paints and indoor emulsions, anti-corrosive paints) 661-519
Spray nozzle 521
Enamel paints, undercoats, primers, llers, indoor latex paints and indoor emulsions, anti-corrosive paints, ame
retardants 661-521
Filter, red (1 pack); 180 mesh extra ne; for spray nozzle 410 500-200-15
Filter, yellow (1 pack); 100 mesh ne; for spray nozzle 515 500-200-10
Filter, white (1 pack); 50 mesh medium; for spray nozzle 517, 519, 521 500-200-06
Spray hose, 3/16”, 7.5 m 0291 007
Spray hose, 3/16”, 15 m 0291 008
Technical Data
Pump type Piston pump
Power source 230 V
~
50 Hz / 240 V
~
50 Hz
Power consumption 800 W / 830 W
Fusing Only connect to sockets protected with an FI fuse (16 A)
Protection class I
Max. spray pressure 20 MPa (200 bar)
Max. delivery rate 1.3 l/min
Sound pressure level * 75 dB (A) Uncertainty K= 4 db
Sound pressure output * 88 dB (A) Uncertainty K= 4 db
Oscillation level ** < 2.5 m/s
2
Uncertainty K= 1.5 m/s
2
Max. temperature of coating
substance
40°C
Max. nozzle size 0.019"
Hose length 15 m
Product dimensions approx. 73 x 47 x 55 cm
Weight approx. 25.2 kg
* Measured in accordance with EN 50144-2-7:2000
** Measured in accordance with EN 60745-1
Information about the oscillation level
The specied oscillation level has been measured according to a standard test procedure and can be used to compare against
electric tools.
The oscillation level is also for determining an initial assessment of the vibrational strain.
Attention! The vibration emission value can dier from the specied value when the electric tool is actually in use, depending on
how the electric tool is being used. It is necessary to specify safety measures to protect the operating personnel. These measures are
based on an estimated shutdown during the actual conditions of use (all parts of the operating cycle are taken into consideration
here, for example periods when the electric tool is switched o, and, when it is switched on but running without any load).
Environmental protection
The device and all accessories and packaging have to be recycled in an environmentally friendly
manner. Do not dispose of the appliance with household waste. Support environmental protection
by taking the appliance to a local collection point or obtain information from a specialist retailer.
Leftover paint and solvents may not be emptied into drains, the sewage system or disposed of as household rubbish. It has
to be disposed of separately as special waste. Please pay special attention to the instructions on the product packaging.
To Next Page
Loading...
Need help?
General
