> Never leave the machine set to a heavy cut, always reduce it to a minimum
cut.
> Use cutting blades designed for this machine only.
> Rectify the faults including guards and cutter block immediately as they are
discovered.
> The machine is equipped with an interlock switch. It only works after the dust
extractor is mounted and the switch is closed. Make sure you have already
mounted the whole machine otherwise it does not work.
> CAUTION: Always mount the dust extractor to the machine for the
machine safety.
TTB579PLN by TITAN
Getting started...
GB
IE
Technical and legal
information
14
To Next Page
Loading...
Need help?
General
