Titan TTB579PLN User Manual

TTB579PLN by TITAN
05
Getting started...
Technical and legal
information
Technical specifications
General
> Input Voltage
> Power Input
> No Load Speed
> Max. Planing Width
> Max. Depth of Cut (Planer)
> Max. Depth to Cut (Thicknesser)
> Planing Height
> Feed Speed
> Table Size
> Net Weight
:
:
:
:
:
:
:
:
:
:
230-240V~50Hz
1500W
9000min
-1
204mm
3mm
2mm
5-120mm (Thicknesser)
6m/min (Thicknesser)
740x212mm (Planer)
270x204mm (Thicknesser)
26.5kg
VIBRATION
The European Physical Agents (Vibration) Directive has been brought in to help
reduce hand arm vibration syndrome injuries to power tool users. The directive
requires power tool manufacturers and suppliers to provide indicative vibration test
results to enable users to make informed decisions as to the period of time a power
tool can be used safely on a daily basis and the choice of tool.
Further Advice can be found at www.hse.gov.uk
The declared vibration emission value should be used as a minimum level and
should be used with the current guidance on vibration.
Calculating the actual period of the actual period off use can be difficult and the HSE
website has further information.
The declared vibration emission been measured in accordance with a standardised
test stated above and may be used to compare one tool with another.
Sound power level L
WA
: 105.9dB(A)
Sound level according to
EN 61029
Work mode description 1
(if required by the relevant Part 2)
Vibration total values (triax vector sum) determined according to EN 61029:
Sound pressure level L
pA
: 92.9dB(A)
Uncertainty K
pA
, K
WA
: 3dB(A)
Vibration emission value a
h
= 3.0m/s
2
Uncertainty K = 1.5m/s
2
GB
IE

Titan TTB579PLN Specifications

General

Brand	Titan
Model	TTB579PLN
Category	Planer
Language	English