Titan TTBPP52 - Page 33

33
TTBPP52
In more detail . . .
Care and maintenance
Air lter
Inspect the air lter regularly. Clean or replace it with a new one if necessary.
1. Unscrew the xing nut on the cover of the air lter case (21). Remove the cover
(Fig. 18).
18
Fixing nut
Cover
Air
lter
21
2. Remove the air lter and tap it on a stable surface to remove dust. Use compressed
air (max. 3 bar) to remove stubborn dust.
3. Apply a small amount of air lter oil on the air lter to obtain an optimal performance.
Wring out surplus oil and put the air lter into the air lter case (21).
4. Ret the cover and secure it with the xing nut.
Fuel, fuel lines and fuel lter
The fuel tank of this machine is tted with a lter located at the free end of the fuel pipe.
If it is necessary to clean or replace the fuel lter, contact an authorised service centre
or a similarly qualied person.
> Keep fuel fresh (less than 30 days) or add fuel stabiliser.
> Empty the fuel tank after every use.
> Run the machine dry of fuel in idle before storage.
> Replace fuel lines and fuel lters every 2 years.