To Next PageTo Next Page
Need help?Do you have a question about the Titan XT330 and is the answer not in the manual?
General| Type | Airless Paint Sprayer |
|---|---|
| Max. Operating Pressure | 3300 PSI |
| Flow Rate | 0.33 GPM |
| Power Source | Electric |
| Voltage | 120 V |
| Max. Tip Size | 0.021 inches |
| Hose Length | 50 ft |
Preventing severe injury from high-pressure paint streams by avoiding skin contact with the fluid.
Mitigating risks from flammable vapors and static electricity during spraying operations.
Ensuring protection against harmful inhaled or skin-contact materials.
Following codes, using proper parts, and maintaining balance during operation.
Ensuring proper use of extension cords and grounding for electrical safety.
Lists parts included in the shipping carton and tools required for assembly.
Explains the operation of the sprayer's key controls, including ON/OFF switch and knobs.
Details performance capabilities, power source, safety features, and material compatibility.
Provides a guide to spray gun models, tips, and hose lengths for different sprayer models.
Illustrates and labels the various parts of the sprayer system.
Step-by-step guide for unfolding and assembling the cart models (XT290, XT330).
Steps for connecting the spray hose and suction/return tubes for the XT250 model.
Instructions on how to lock the spray gun trigger for safety and maintenance.
Steps to safely release pressure from the spray hose before maintenance.
Procedure for grounding the spray gun when using oil-based materials to prevent static discharge.
Steps to purge the system of test fluid and draw in the spraying material.
Procedure for purging air, water, or solvent from the spray hose and gun.
Instructions for inserting and tightening the spray tip and guard assembly.
Tips for gun movement, trigger control, and overlap for an even coating.
Steps to clear a distorted or stopped spray pattern by cleaning or rotating the tip.
Procedure for cleaning or replacing the spray gun filter after each use.
Instructions for cleaning the filter screen at the bottom of the suction tube.
Important guidelines for cleaning with water or mineral spirits and proper disposal.
Steps for cleaning the sprayer using water and a garden hose.
Steps for cleaning the sprayer using mineral spirits for oil-based materials.
Instructions for removing, cleaning, and reassembling the suction hose, tube, and filter.
Steps for removing and cleaning the filter, tip, washer, and saddle seat.
Steps to prepare the sprayer for storage up to 16 hours using latex materials.
Instructions for resuming operation after short-term storage.
Steps to protect the sprayer for extended periods, including oil lubrication.
Procedure for folding the cart models for easier storage.
Procedure for cleaning the inlet valve assembly and Sureflo valve solenoid.
Detailed steps for disassembling the fluid section for seal replacement.
Detailed steps for reassembling the fluid section after seal replacement.
Diagnosing and resolving common sprayer operational issues with a step-by-step approach.
Routine maintenance tasks and information on available repair kits for pump parts.
List of part numbers and descriptions for the XT-05 spray gun assembly.
List of part numbers and descriptions for the LX60 spray gun assembly.
List of part numbers and descriptions for the suction set components.
List of part numbers and descriptions for cart and stand assembly components.
Catalog of optional accessories to enhance sprayer functionality.
List of available replacement parts for the sprayer system.
Overview of the limited warranty for Titan airless paint spray equipment.
