TK-STAR TK906 - Set Over-speed Alarm; Set Shake Sensor Alarm

SOS
number canceling:
Command:noso s123456
Reply:nosos
number
ok
4.4. Over-speed Alarm
setting
(It
works only in continuous
positioning
mode.)
Over-speed
Alarm
setting :
Command
:speed123456
070
(Suppose
speed is 70km/h)
Reply:speed ok
E.g:
sD€ed
ok
When
the unit
speed is over
70km/h,
it
will send message
"speed
alarm!" to the admin
number every 5 minutes.
Over-speed
Alarm
canceling:
Command:nosp eedl23 45 6
Reply:nospeed ok
4.5. Shake sensor
setting
Command:shockl23456
Message
Reply:shock
ok
F c'
@
thock
ok
Notc:Pls
keep
the
tracker being
stationary for 5 minutes, this function will
work.
The tracker will send SMS
"sensor alaml" to the admin number and the sos
number when the unit
get
shaked.
.7.