Please be aware of Connection of 2 outdoor cameras is required.
1.8 Operation Introduction On Indoor Monitor
VISITOR CALL
Standby mode
The Visitor press
the call button on
outdoor camera 1
A continuous ring tone
is heard inside and
outside
The visitor’s image
automatically displayed on
the screen
Stop ringing
Start conversation
with outdoor camera
The conversation
duration is 120s
at a time
Press the “ ”
button on indoor
monitor
The Visitor press
the call button on
outdoor camera 2
NOTICE:
If both call button on two outdoor camera are pressed at approximate
to the same time, the preference will be given to the outdoor camera
which call button was pressed first, unless the call button is pressed
again after the indoor monitor go into standby mode, please be aware
of that there is no indication on second outdoor camera .
NOTICE:
The indoor unit will automatically go into standby mode if you are not
at home or have not reached the indoor unit in 60s.
End
release the
door lock
Press the “ ”
button on indoor
monitor.
Both the visitor's voice and image will not be switched off within 20s of time span when the
“ ” button is pressed, this individualized function allow you to make sure whether the
visitor already come in.
When the doorbell record for the video mode, from the start of a call, the whole process will
be recording. If the user press the icon “ ”, the recording will be stopped manually.
When
the doorbell record for the snapshot mode,
user
can press the button “ ” to capture an image.
if a visitor press the call button on the outdoor
camera, the first picture will be captured in the built-in storage of the indoor monitor,
In monitoring mode, user can hear the sound transmitted from the outdoor doorbell, user can press
the button “ ” to conversation and press the button “ ” to unlock.
Press the “ ”
button on indoor
monitor
hang up
Option in the settings in the menu: DOOR1, CAM1, DOOR2, CAM2 operating mode (open or closed)
Standby Mode
Press the “ ” button
Call Outdoor
Press the “ ”
button to end
the call.
NOTICE:
If you are using only one outdoor camera in monitoring mode, you can also end the
monitoring mode by pressing the monitoring button again(Must be Close CAM1;
DOOR2; CAM2 in the menu option).
If you use two indoor units, you can also simultaneously in other indoor unit
starts monitoring mode, the same images are displayed on the screen of
the different indoor unit.
Show CAM1
image
Show DOOR1
image
Show DOOR2
image
Show CAM2
image
Close LCD
Each monitoring time is 60S
Monitoring
If a conversation with outdoor unit is underway in monitoring mode, during
this time a visitor press the call button on either of outdoor unit, the
monitoring mode will be switched off, the just visitor’s image will appear on
its screen and continuous ringing will be heard. If you are using the indoor
unit with hands-free, you can press the talking button to reactivate
conversation with the visitor.
Press the “ ” button
on the indoor unit, the
electric lock will be opened.
Talk
Talk
Unlock
Unlock
Hang up
Hang up
Unlock
Hang up
Hang up
13
14
To Next Page
Loading...
Need help?
General