EasyManua.ls Logo

TNICER T2 - Button Functions and Operations; Power and Reset Operations; Call Handling; Auto-Answer Control

TNICER T2
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power on: Press and hold the [multi-function button
+ intercom button] for 3 seconds, the power-on prompt
will sound, and the blue light will be on.
Power off: Press and hold the [multi-function button
+ intercom button] for 3 seconds,the power off prompt
sounds, and the red light is on.
Answer incoming calls: When there is an
incoming call, short press[Multi-function button] to
answer the call.
Automatic answer: In standby mode, long press
[intercom button + volume up button + volume
down button] for 3 seconds, automatic answer is on.
Reset: Press and hold the[multi-function button + volume up button] for 5 seconds in
the power-on state,reset after the red and blue lights come on at the same time.
About 3 sec
Button Functions and Operations
Power on/off
Answering Function
Reject: Press and hold [Multi-function button] for 2 seconds to reject the call when you
hear an incoming call ringing.
End call: During a call, short press [multi-function button] to end the call..
Last redial: In standby mode, quickly double-click [multi-function button] to automatically
dial the last number dialed.
Cancel auto-answer: lf you don't need the
auto-answer function, you can long press [intercom
button+volume up button+volume down button] for
3 seconds to cancel the auto answer.
About 3 sec

Related product manuals