TNICER T2 - Installation Methods; Method 1: Adhesive Pad Installation

Ｈｅｌｍｅｔ
Ｍｏｕｎｔｉｎｇ
ｂｒａｃｋｅｔ
Ｈｅａｄｓｅｔ
Ｄｏｕｂｌｅ－ ｓｉｄｅｄ
ａｄｈｅｓｉｖｅ ｐａｄ
Ｐｕｔ ｔｈｅ ｄｏｕｂｌｅ－ ｓｉｄｅｄ ａｄｈｅｓｉｖｅ ｐａｄ ｏｎ ｔｈｅ
ｍｏｕｎｔｉｎｇ ｂｒａｃｋｅｔ
Ｐｕｔ ｔｈｅ ｍｏｕｎｔｉｎｇ ｂｒａｃｋｅｔ ｗ ｉｔｈ
ｄｏｕｂｌｅ－ ｓｉｄｅｄ ｔａｐｅ ｏｎ ｔｈｅ ｈｅｌｍｅｔ
Ｓ ｎａｐ ｔｈｅ ｈｅａｄｓｅｔ ｉｎｔｏ ｔｈｅ ｍｏｕｎｔｉｎｇ ｂｒａｃｋｅｔ，
ｔｈｅ ｉｎｓｔａｌｌａｔｉｏｎ ｉｓ ｃｏｍｐｌｅｔｅ
Installation
Method 1: Use double-sided adhesive pad
Attention：
The headset insertion
direction is "microphone
logo" facing upward,
as shown in the figure: