Need help?Do you have a question about the Toa P-150D and is the answer not in the manual?
Combines overload protection and power switch. Predictable and temperature-independent.
22-step attenuators for precise input sensitivity adjustment, 2dB steps.
Relay disconnects load on short-circuit or DC current at output.
Technical specifications for mono operation.
Technical specifications for mono operation.
Defines power output for 8-ohm and 4-ohm loads, stereo and mono modes.
States frequency response range and tolerance.
Specifies THD levels at different power outputs and frequencies.
Specifies IM distortion levels with standard test signals.
Describes the protection features.
Technical specifications for mono operation.
Combines overload protection and power switch. Predictable and temperature-independent.
22-step attenuators for precise input sensitivity adjustment, 2dB steps.
Relay disconnects load on short-circuit or DC current at output.
Technical specifications for mono operation.
Technical specifications for mono operation.
Defines power output for 8-ohm and 4-ohm loads, stereo and mono modes.
States frequency response range and tolerance.
Specifies THD levels at different power outputs and frequencies.
Specifies IM distortion levels with standard test signals.
Describes the protection features.
Technical specifications for mono operation.
General| Power Output | 150 W |
|---|---|
| Rated Output | 150 W |
| Signal-to-Noise Ratio | 60dB or more |
| Dimensions | 420mm (W) x 132mm (H) x 300mm (D) |
| Input Impedance | 10 kΩ (Mic/Line) |
| Output Impedance | 4Ω (direct output) |
To Next Page
