To Next PageTo Next Page
Need help?Do you have a question about the Toa WA-1822 and is the answer not in the manual?
Safety guidelines for setting up the amplifier, including connection and placement.
Safety precautions and warnings to observe during the operation of the amplifier.
Advice on orienting the unit for optimal sound and feedback avoidance.
Guidance on placing the unit for better sound clarity and microphone range.
Explains how to avoid signal loss due to radio reflections.
Advises keeping the unit away from sources of high-frequency noise.
Recommends maintaining a minimum distance for wireless microphones.
Identifies and explains front panel components and controls.
Identifies and explains top panel components and controls.
Identifies and explains rear panel terminals and connections.
Details the location and function of the battery compartment.
Describes the wireless tuner installation slots.
How to connect and use the unit with an AC power outlet.
Details on battery types, installation, replacement, and usage guidelines.
Procedure for inserting wireless tuner units into the amplifier.
How to set channels for wireless microphones to avoid interference.
Identifies and explains the functions of the cassette deck buttons and controls.
Instructions for playing audio from a cassette tape.
Procedures for fast-forwarding, rewinding, and stopping the tape.
Steps for recording audio onto cassette tapes.
Explanation of how to use the cue function to find silent tape sections.
Details on the different tape playback and recording modes available.
Instructions for cleaning the cassette deck's playback and erase heads.
Procedure for demagnetizing the recording/playback head to prevent noise.
Guidelines for connecting and using external speakers with the unit.
Instructions for connecting external audio sources for playback.
Instructions for connecting external devices for recording audio.
Safety guidelines for setting up the amplifier, including connection and placement.
Safety precautions and warnings to observe during the operation of the amplifier.
Advice on orienting the unit for optimal sound and feedback avoidance.
Guidance on placing the unit for better sound clarity and microphone range.
Explains how to avoid signal loss due to radio reflections.
Advises keeping the unit away from sources of high-frequency noise.
Recommends maintaining a minimum distance for wireless microphones.
Identifies and explains front panel components and controls.
Identifies and explains top panel components and controls.
Identifies and explains rear panel terminals and connections.
Details the location and function of the battery compartment.
Describes the wireless tuner installation slots.
How to connect and use the unit with an AC power outlet.
Details on battery types, installation, replacement, and usage guidelines.
Procedure for inserting wireless tuner units into the amplifier.
How to set channels for wireless microphones to avoid interference.
Identifies and explains the functions of the cassette deck buttons and controls.
Instructions for playing audio from a cassette tape.
Procedures for fast-forwarding, rewinding, and stopping the tape.
Steps for recording audio onto cassette tapes.
Explanation of how to use the cue function to find silent tape sections.
Details on the different tape playback and recording modes available.
Instructions for cleaning the cassette deck's playback and erase heads.
Procedure for demagnetizing the recording/playback head to prevent noise.
Guidelines for connecting and using external speakers with the unit.
Instructions for connecting external audio sources for playback.
Instructions for connecting external devices for recording audio.
General| Power Output | 20 W |
|---|---|
| Rated Output | 20 W |
| Speaker Impedance | 4 - 16 Ω |
| Signal-to-Noise Ratio | 50 dB or more |
| Inputs | Mic × 2, Aux × 1 |
| Outputs | 4 - 16 Ω speaker |
| Input Impedance | Aux: 10 kΩ |
| Total Harmonic Distortion | 3% or less (1kHz, 20W) |
