ENGINE OPERATION28
7
6. When the engine has started, imme-
diately return the choke lever to the
Open position then move the throttle
lever downward to slow speed.
1. Close
2. Open
ENON00928-0
Note
If the engine stops soon after having been
started with the choke lever at the Close
position, set the choke lever to the Open
position and perform the starting proce-
dure again.
ENOM00042-D
Emergency starting
ENOW00099-A
When the emergency starter rope is used for
starting engine;
z Start in gear protection does not work. Be
sure to shift is at neutral position. Other-
wise the engine will move the boat imme-
diately and cause personal injury.
z Be careful that your clothes or other
items do not get caught in the rotating
engine parts.
z To prevent accident and injury by rotating
parts, do not re-attach flywheel cover
and the top cowl after the engine has
been started.
z Do not pull starter rope if any bystander is
behind. The action can injure the
bystander.
z Attach engine stop switch lanyard to
clothing or any part of body like arm
before starting engine.
1. Remove the top cowl fixing bolts, to
remove the top cowl.
2. Remove the three bolts fastening the
recoil starter.
3. Remove the recoil starter.
4. Insert the knotted end of the starter
rope into the notch in the flywheel
and wind the rope around the fly-
wheel several turns clockwise.
5. Tie a loop in the another end of the
emergency starter rope and attach
socket wrench that is included in the
tool kit.
6. Set the control lever in the Neutral
position.
WARNING
1
2
ENOF02017-0
To Next Page
