EasyManua.ls Logo

TOHATSU M2.5A2 - Steering

TOHATSU M2.5A2
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGINE OPERATION32
7
3. Push the stop switch.
1. Stop switch
2. Stop switch lock
4. Close the air vent screw and fuel
cock.
1. Fuel cock
2. Air vent screw
ENOW00869-0
After stopping the engine:
z Close the air vent screw on the fuel tank
cap.
z Disconnect the fuel connector of the
engine and the fuel tank.
z Disconnect the battery cord, after each
use.
Emergency engine stopping
Remove stop switch lock to stop the
engine.
1. Stop switch
2. Stop switch lock
ENOM00910-0
Spare emergency stop switch lock (For
CE marking model)
A spare emergency stop switch lock is
provided in the tool bag.
When used as described, the emergency
stop switch clip and emergency stop
switch lanyard system stops the engine if
the operator falls away from the controls.
When an operator falls into water, be
sure to use emergency stop switch lock
of the spare.
Be sure to confirm the spare stop switch
lock is in the tool bag before begin to
operate.
ENOM00920-0
ENOW00870-0
Sudden steering may cause passenger(s) to
be thrown overboard or falling down.
WARNING
ENOF02027-0
1
2
2
1
ENOF02030-A
6. Steering
WARNING
ENOF02029-0
1
2
ENOF00891-0