TOHATSU MFS 5 Service Manual

5-46
Power Unit
4st 4/5/6 2011
6. Attach push rods 7, rocker arms 8, rocker arm pivots 9
and adjusting nuts to cylinder head.
77
8
8
9
9
00
Ensure that push rods 7 are engaged with valve
lifters.
Perform tappet adjustment.
Refer to "5-17".
4 2
31
8. Attach cylinder head cover, and tighten bolts to specified
torque in the order shown.
Cylinder Head Cover Bolts :
6 N · m (4 lb · ft) [0.6 kgf · m]
7. Attach cylinder head cover 0.
5. Attach O ring 5 and oil pump cover 6 and secure with
bolts.
Apply much engine oil to oil pump and rotors
(outer and inner).
66
MFS4-5-6Ech05110425.qxd11.4.2511:39AM  ページ46

TOHATSU MFS 5 Specifications

General

Brand	TOHATSU
Model	MFS 5
Category	Outboard Motor
Language	English