148
About MyDrive Connect
The quickest and easiest way to keep your GO up-to-date is to use a Wi-Fi connection.
If you are unable to connect to the internet using Wi-Fi or you prefer to use a different method, you can
connect to the internet using a USB connection to a computer. To connect your GO to the internet,
MyDrive Connect must be installed on the computer.
Note: You cannot use MyDrive Connect to manage your device.
Setting up MyDrive Connect
To get ready to use MyDrive Connect for the first time, do the following:
On your computer, open a web browser and go to tomtom.com/mydrive-connect.
1. Click Download for Mac or Download for Windows.
2. Save the downloaded file.
3. Double-click to open the downloaded file.
4. Follow the instructions on the screen to install MyDrive Connect.
5. Choose your settings for automatic start-up and updates.
6. Click OK.
You can now access MyDrive Connect from the notification area on your desktop.
MyDrive Connect starts automatically when you connect your GO to your computer.
Connecting to the internet using MyDrive Connect
If you are unable to connect to the internet using Wi-Fi, you can install updates and new items using a
USB connection to a computer.
While connected, you can also Sync using TomTom MyDrive.
To connect to the internet using USB, do the following:
1. Make sure MyDrive Connect is installed on your computer.
2. Make sure your computer has a working internet connection.
3. Connect your GO to your computer using the USB cable supplied, then switch your GO on.
MyDrive Connect starts automatically and shares your computer's internet with your device.
Note: Use ONLY the USB cable supplied with your GO. Other USB cables may not work.
Note: You cannot use the mount to connect your GO to your computer.
Note: You should plug the USB cable directly into a USB port on your computer and not into a
USB hub or USB port on a keyboard or monitor.
4. Install your updates and new items on your GO.