Tomy FLS-1000 - Connecting Power and Ensuring Proper Grounding

ー21ー
3-2. Connecting to the Power Source and Grounding
WARNING
Connect the FLS-1000 to a power outlet of the
voltage specified as correct for FLS-1000. Do not
connect it to a shared outlet.
●
Failure to do so may cause accidental fire, short circuit
or malfunction.
Do not use extension cords or power strips.
●
Failure to do so may cause accidental fire, short circuit
or malfunction.
Make sure that the FLS-1000 is properly
grounded.
●
Failure to do so may cause explosion, electric shock or
malfunction.
Never ground the FLS-1000 through a water
main or a gas pipe.
●
Failure to do so may cause explosion, electric shock or
malfunction.
To protect against electric shock adequate grounding of FLS-1000 must be provided. When it cannot
be provided, arrange for a qualied electrician to carry out the necessary grounding work.
The FLS-1000 employs a plug with a two-pole grounding electrode. Plug the FLS-1000 into a two-
pole socket outlet of the voltage specied as correct for FLS-1000.
※
For the power requirements of the FLS-1000 please refer to “11-1. Specications of the FLS-1000”.
Plug the FLS-1000 directly into a power outlet of the specied voltage. Do not connect it to a shared
outlet.
Leave sucient space around the power outlet so that the plug can be easily unplugged.
※
When hearing thunder, unplug the power plug from the outlet to prevent lightning damage.