Tomy FLS-1000 - Routine Maintenance and Cleaning Procedures; Cleaning and Disinfecting the Autoclave Unit

ー52ー
WARNING
CAUTION
Be sure to unplug the FLS-1000 before performing maintenance
procedures.
●
Failure to do so may cause electric shock.
8. ROUTINE MAINTENANCE
Allow chamber to cool down sufficiently before performing
maintenance work.
●
Otherwise, high temperature inside the chamber may cause burns.
Wipe the unit with a soft cloth moistened with a mild detergent.
Wipe away any detergent residue using a cloth dipped in clear water and squeezed almost
dry.
<
To clean the main body
>
①
②
If the main body exterior or the chamber interior of the FLS-1000 becomes stained or dirty, clean
or disinfect it according to the following procedures:
8-1. Cleaning and Disinfecting the Main Body
Disinfect the main body with ethanol.
<
To disinfect the main body
>
①