To Next PageTo Next Page
Need help?Do you have a question about the Tomy FLS-1000 and is the answer not in the manual?
General| Brand | Tomy |
|---|---|
| Model | FLS-1000 |
| Category | Laboratory Equipment |
| Language | English |
Explains the meaning of warning and caution symbols used in the manual for safety and operational information.
Details essential warnings and cautions to prevent accidents, injuries, and equipment damage during operation.
Explains the fundamental principles behind steam generation and the sterilization cycle in the FLS-1000.
Provides a detailed breakdown and labeling of all external and internal parts of the FLS-1000 unit.
Guides on selecting the installation location and physically setting up the FLS-1000 unit.
Details on how to safely connect the FLS-1000 to the power supply and the importance of grounding.
Explains how to set the altitude level to ensure accurate sterilization based on atmospheric pressure.
Instructions for safely switching the FLS-1000 power supply on and off, including necessary checks.
Provides critical safety warnings and steps for opening and closing the autoclave's chamber lid.
Explains how to check the pressure gauge for correct reading and what to do if it malfunctions.
Details on how to check and maintain the correct water level in the exhaust tank for safe operation.
Guidance on checking and maintaining the quality and level of sterilizing water within the chamber.
Instructions and warnings on how to properly place articles into the chamber for effective and safe sterilization.
Step-by-step guide to setting temperature, time, exhaust speed, and cooling fan parameters.
Procedures and safety checks before starting the sterilization process, including handling pressure gauge warnings.
Information on recognizing the end of a cycle and safely preparing to open the chamber.
Steps and warnings for safely removing items from the chamber after sterilization is complete.
Instructions for safely draining the sterilizing water from the chamber after use.
Details on how to set parameters for sterilizing liquids using the FLS-1000.
Explains how to store and recall frequently used operating parameter settings for convenience.
How to use the check function to view set and actual temperature and time values.
Instructions for setting a waiting time for the operation to start automatically.
Information on how the autoclave responds to power failures and how to resume operation.
How the system reminds users about annual inspections and how to record maintenance dates.
Allows changing the display unit for sterilization time and timer between hours, minutes, or hours/minutes.
Options for setting exhaust speed, including variable speed, for liquid sterilization courses.
How to set the temperature at which the chamber lid can be safely opened after sterilization.
Setting the cycle count for the sterilizing water change alert and resetting the counter.
Enabling or disabling the illumination feature for the exhaust tank and its alert function.
Monitoring sterilization with a sensor placed directly into the article for accurate temperature control.
Details on recording process data and printing sterilization parameters using optional accessories.
Instructions for cleaning and disinfecting the exterior and interior of the FLS-1000 main body.
Comprehensive weekly procedures for cleaning various parts and inspecting the autoclave for safe operation.
A guide to diagnosing common symptoms and applying the correct remedies for FLS-1000 issues.
Lists system error codes, their possible causes, and recommended remedies for troubleshooting.
Lists operation-specific error codes, their causes, and the corresponding solutions for the FLS-1000.
Provides contact details for TOMY offices and important warnings for returning or shipping parts.
Important warnings and requirements for decontaminating the FLS-1000 before disposal or transfer.
Comprehensive technical data including model, operating ranges, power, dimensions, and safety devices.
