9
Takeoff and Landing
Method 1
As shown in the picture below, press the takeoff/landing button to take off. When the
drone is in the air, press the button again to make it land.
Method 2
As shown in the picture below, push both joysticks simultaneously to unlock the drone,
then push the left one upwards to takeoff. After the drone takes off, push the right one
downwards to land.
Emergency Stop
In case of emergency, press and hold the STOP button for one second, the drone stops
working and falls.
Tip: The motor should only be stopped in case of emergency to reduce the risk of
damage.
To Next Page
Loading...
