Tone Commander 6210 - Selecting Terminal Mode

36 Tone Commander 6210/6220 User Manual
When digits have been entered, press the Done key twice to
return to the key selection menu or the Setup key to exit
Setup Mode.
Terminal Mode __________________________
(National ISDN only)
If the network does not support Parameter Download, you must
manually select the terminal mode.
From the Installation Options menu, select MODE.
(Setup → INSTL → More
4
→ MODE)
Select the terminal mode based upon the type of service that
was ordered from your network service provider.
CACH – CACH EKTS.
BASIC – Voice or Basic EKTS.
In most cases, your phone service should be configured for
CACH EKTS.
Press the Done key to return to the Installation Options menu
or the Setup key to exit Setup Mode.
Done
TERMINAL MODE=CACH EKTS
CACH BASIC
Done
F579871234
|BKSP CLEAR PAUSE FA