Tone Commander 6210 - Resetting to Factory Default Settings

Tone Commander 6210/6220 User Manual 39
Reset to Factory Default Settings
__________
Reset returns all settings to the factory defaults, and clears all speed
dial numbers, logs, and passwords. This option is useful when moving
the telephone to a new user or location.
Default values are listed in the table on page 77.
From the Installation Options menu, select RESET.
(Setup → INSTL → More
4
→ RESET)
Select YES to confirm the reset operation.
Press the Done key to return to Installation Options menu or
the Setup key to exit Setup Mode. The phone will restart.
Done
ALL SETTINGS CLEARED
RESET ALL SETUP OPTIONS?
YES NO