Tone Commander 6210 - Password Recovery and Removal

Tone Commander 6210/6220 User Manual 65
Press the Done key to return to the User Options menu or the
Setup key to exit Setup Mode.
Removing the Password
Select CLEAR.
“PASSWORD CLEARED” will be displayed to confirm that the
password has been removed.
Press the Done key to return to User Options menu or the
Setup key to exit Setup Mode.
What to do if you lose your password
Contact your system administrator or call Tone Commander technical
support at (800) 524-0024 in the event you misplace your password.
You will need to report the serial number of your telephone to receive a
new password.
You can use the RESET option (page 39) to remove all passwords.
This option will also clear all programmed numbers and settings in your
phone.
Done
Done
PASSWORD CLEARED