TONGHER TH-Mars 2 - About the Electric Fence Energizer; How Does an Electric Fencing System Work

Operator’s Manual
This manual is designed to ensure you achieve optimum results from your Electric Fence Energizer.
To ensure maximum output with minimum complications and optimum safety, we advise you to
follow the guidelines carefully concerning the correct installation of your fence energizer and the
required earthing system. Anything less will substantially affect the performance of the energizer
and can result in unnecessary complications and installation expense.
About the electric fence energizer
This Electric Fence Energizer is a comprehensive perimeter or strip fencing energizer and is an ideal
solution for those who want a simple, efficient and cost-effective system to power their fences.
It is easy to install and can be operated using either AC mains power, 12 volt (v) deep cycle
lead-acid/gel battery or in conjunction with a 30/40/50 or other watt (w) solar panel, making this a
suitable system for larger scale settings where no mains power is available. As a combination, fixed
or portable system, the Electric Fence Energizer provides flexibility with pasture management and is
the ideal solution for short or long-term animal control or rotational crop grazing
How does an electric fencing system work?
An electric current, generated from an energizer
which is earthed, travels along a fence wire as a
pulse. The circuit between the fence and the ground
is completed when an animal touches the fence
wire and consequently receives a short, sharp but
safe shock. This provides enough of a deterrent to
an animal, making the electric fence a psychological
barrier rather than a physical one.
TH-MARS SERIES PRODUCT SPECIFICATIONS
TH-MARS 2 TH-MARS ES2 TH-MARS 5 TH-MARS ES5 TH-MARS 6
Power supply 12V（110-240V 50HZ/60HZ）
Interval Period 1.2 / 2.0 s 1.2 / 2.0 s 1.2 / 2.0 s 1.2 / 2.0 s 1.2 / 2.0 s
LCD shows working Yes NO Yes NO YES
Consumption using a
power adaptor
1.92W 1.92W 2.4W 2.4W 2.85W
Timer Option NO Option NO Option
Intelligent fault
self-detection
YES YES YES YES YES
Output voltage
adjustment
Yes NO Yes NO Yes
Input current 160mA 160mA 200mA 200mA 220mA
Peak output voltage
（NO LOAD）
10 kV 10 kV 10 kV 10 kV 12 kV
Output voltage（500Ω） 4.5kv 4.5kv 4.5kv 4.5kv 6.0kv
Stored energy 2.9 J 2.9 J 5.4 J 5.4 J 6.3J
Km Multi Wire Fence 25km 25km 35km 35km 39km
Tongher Recommends 8km 8km 10km 10km 12km