@ToolkiRC 2023
Safety
1.M8P allows input voltage of DC 7.0-35.0V. Ensure the
charger is only connected to a suitable power source
and correct polarity.
2. Do not use this product in hot, humid, flammable or
explosive environments.
3. Please do not use this charger without supervision.
Never leave charging batteries unattended.
4. When not using this product, please unplug the input
po we r.
5. When using the charging function, please set a
current that matches the battery. Do not set an excessive
current for charging to avoid damage to the battery.
Check the guidelines of your battery’s manufacturer for
correct charging instructions.
To Next Page
Loading...
